Perlin Noise

rob1221

  • *
  • Posts: 9419
The amount and relative position of tiles depends on what numbers you assign to it.  For example, the light green tile has a range of 141-160.

I woudn't expect checking for actor/tile overlap would slow down the game so much.  Are you getting the col and row based on the player's position and using the "ID for tile at" block?

RosalinaGalaxer

  • Posts: 238
I'm using the "data for tile at" block. I dunno if that impacts it heavily or not, but I get an average of 23 frames per second. I also made the scene 100 by 100 tiles, but I'd think that would only matter for the startup, where it places all the tiles.

Would I be able to set this up to spawn a tile that would spawn a structure around it? Like houses in Terraria, or villages in Minecraft: not super common, and also not super close together.
Ģ̷̓l̴̥̒͑̕͝ì̷̘͈̬͈̖̂͂̔̕t̷͔͇̯̥̬̀̽̓͜͝c̵͇̦̼̮̉̐̈́̕͝ͅͅḣ̵̡̫̞͚̐̅ͅë̶̗̦̪̖͚̜́͊̄͑s̵̺̹̖̼̥̃.̴̮̫͐ ̶̛̯͍̓̇̾̎Ť̵̳̻̙̦̈́̅̓͆̚h̴̗̩̫͖̍͑̋̋͗͜͜e̴̻̰̔̂ ̷̢͈̖̏́b̸̘̻͖̣̙̍͒̆́a̶̺̗̟̿͒n̵̡̼̘̺̚ḙ̸̗̹̥̜͐͘͝ ̸̨̮̭̳̓͜ō̸̧͙̜̮̌͑f̴̜̒̔̆͊ ̵̪̹̱̪̌͘͝Y̸͔̪̽͠u̷̱̳̟͒̂̊͒̕͜ḿ̸̡̤͚̬̪ë̵̪͍̹͝k̶̝̣̗̞̹̖̅̊̅y̶̧̞̟̤͚̋̀̔o̴̯̾'̷̠̐̋͂̇̿̕s̴̡̬̲̠̰̦͗͂ ̴̢̘̤̝͆̀͘b̸̛͖̲͒̅̊̏͝o̶̘̮͊͐͗̇͠͝r̷̰͓͍̣̀̄d̷̢̞̂̚e̶͖̲̯̰̫̅̈͗r̸̢̒̊͜ͅ

“I have never seen a more heated discussion about context, jazz, and cats.” - VanillaButterz

rob1221

  • *
  • Posts: 9419
Quote
I'm using the "data for tile at" block. I dunno if that impacts it heavily or not, but I get an average of 23 frames per second. I also made the scene 100 by 100 tiles, but I'd think that would only matter for the startup, where it places all the tiles.
And it's 60fps without checking for the tile data?

Quote
Would I be able to set this up to spawn a tile that would spawn a structure around it? Like houses in Terraria, or villages in Minecraft: not super common, and also not super close together.
You would need to implement a method to block duplicate tiles within a certain area.

RosalinaGalaxer

  • Posts: 238
Yep, it runs totally fine without checking tiles, apart from the freeze when clicking to generate new tiles, but that's to be expected.

I'll have to mess around and see what I can come up with for blocking tile spawns.
Ģ̷̓l̴̥̒͑̕͝ì̷̘͈̬͈̖̂͂̔̕t̷͔͇̯̥̬̀̽̓͜͝c̵͇̦̼̮̉̐̈́̕͝ͅͅḣ̵̡̫̞͚̐̅ͅë̶̗̦̪̖͚̜́͊̄͑s̵̺̹̖̼̥̃.̴̮̫͐ ̶̛̯͍̓̇̾̎Ť̵̳̻̙̦̈́̅̓͆̚h̴̗̩̫͖̍͑̋̋͗͜͜e̴̻̰̔̂ ̷̢͈̖̏́b̸̘̻͖̣̙̍͒̆́a̶̺̗̟̿͒n̵̡̼̘̺̚ḙ̸̗̹̥̜͐͘͝ ̸̨̮̭̳̓͜ō̸̧͙̜̮̌͑f̴̜̒̔̆͊ ̵̪̹̱̪̌͘͝Y̸͔̪̽͠u̷̱̳̟͒̂̊͒̕͜ḿ̸̡̤͚̬̪ë̵̪͍̹͝k̶̝̣̗̞̹̖̅̊̅y̶̧̞̟̤͚̋̀̔o̴̯̾'̷̠̐̋͂̇̿̕s̴̡̬̲̠̰̦͗͂ ̴̢̘̤̝͆̀͘b̸̛͖̲͒̅̊̏͝o̶̘̮͊͐͗̇͠͝r̷̰͓͍̣̀̄d̷̢̞̂̚e̶͖̲̯̰̫̅̈͗r̸̢̒̊͜ͅ

“I have never seen a more heated discussion about context, jazz, and cats.” - VanillaButterz

rob1221

  • *
  • Posts: 9419
Even with 200x200 tiles and testing on Flash, I don't get any noticeable fps drops.  Does your computer have a very old processor?

RosalinaGalaxer

  • Posts: 238
It's relatively old. I'm testing on HTML5.

I've got an idea, but I don't have access to Stencyl till Monday, so I'll give you a heads up then.
Ģ̷̓l̴̥̒͑̕͝ì̷̘͈̬͈̖̂͂̔̕t̷͔͇̯̥̬̀̽̓͜͝c̵͇̦̼̮̉̐̈́̕͝ͅͅḣ̵̡̫̞͚̐̅ͅë̶̗̦̪̖͚̜́͊̄͑s̵̺̹̖̼̥̃.̴̮̫͐ ̶̛̯͍̓̇̾̎Ť̵̳̻̙̦̈́̅̓͆̚h̴̗̩̫͖̍͑̋̋͗͜͜e̴̻̰̔̂ ̷̢͈̖̏́b̸̘̻͖̣̙̍͒̆́a̶̺̗̟̿͒n̵̡̼̘̺̚ḙ̸̗̹̥̜͐͘͝ ̸̨̮̭̳̓͜ō̸̧͙̜̮̌͑f̴̜̒̔̆͊ ̵̪̹̱̪̌͘͝Y̸͔̪̽͠u̷̱̳̟͒̂̊͒̕͜ḿ̸̡̤͚̬̪ë̵̪͍̹͝k̶̝̣̗̞̹̖̅̊̅y̶̧̞̟̤͚̋̀̔o̴̯̾'̷̠̐̋͂̇̿̕s̴̡̬̲̠̰̦͗͂ ̴̢̘̤̝͆̀͘b̸̛͖̲͒̅̊̏͝o̶̘̮͊͐͗̇͠͝r̷̰͓͍̣̀̄d̷̢̞̂̚e̶͖̲̯̰̫̅̈͗r̸̢̒̊͜ͅ

“I have never seen a more heated discussion about context, jazz, and cats.” - VanillaButterz