[IOS/Android] Heyzap advertising (Interstitial & Rewarded Video) 2.9.1

rodolfovs

  • *
  • Posts: 124
Hello Robin,

Really, I forgot to clean project. I'll do it today and I warn you whether it worked or not. If it did not work I will post the log.

Thank you .

rodolfovs

  • *
  • Posts: 124
Hello Robin,

It worked. I had forgotten about clean project, after I cleaned it, it's all right.

Thanks.

dariolessa

  • Posts: 72
I am using Hayzap 2.9 and EM 0.1.2 and I have this error when I have to try compile.

Thanks for your help.

robinschaafsma

  • *
  • Posts: 706
Can you give me your logs...

What I can tell you now is:

1: Wait a couple of seconds after you initialize Heyzap before you use another Heyzap block.
2: you cannot move the banner if its not created yet, so first use showbanner and then move it.

Maybe this helps, if not please share your logs..

dariolessa

  • Posts: 72
Hello Robin, thanks for you reply, but not works :(

I am sending the logs.

Thanks in advance.

robinschaafsma

  • *
  • Posts: 706
Hello Robin, thanks for you reply, but not works :(

I am sending the logs.

Thanks in advance.


You have below error, follow steps in link below. (download en replace Heyzap SDK)

https://github.com/byrobingames/heyzap/wiki/4.-Error-on-Compiling

dariolessa

  • Posts: 72
Hello Robin, now compile ok :)
I will test on my device later and update you! Thank you very much.
For Applovin have to copy framework too, right ?
Best Regards.

robinschaafsma

  • *
  • Posts: 706
Hello Robin, now compile ok :)
I will test on my device later and update you! Thank you very much.
For Applovin have to copy framework too, right ?
Best Regards.
No for AppLovin you don't have to do that, only make sure you use AppLovin version 0.0.4 else it will not work with Heyzap 2.9

dariolessa

  • Posts: 72
Hello Robin, you know now compile OK with admob and heyzap. But when I try to show ads, game quit (crash).
What can I do to fix that ?

robinschaafsma

  • *
  • Posts: 706
Hello Robin, you know now compile OK with admob and heyzap. But when I try to show ads, game quit (crash).
What can I do to fix that ?
Don't know need logs from Xcode that tells why it crashed.

robinschaafsma

  • *
  • Posts: 706
By the way, banner is showing at the bottom by default, so you don't have to move the banner to the bottom at startup,

dariolessa

  • Posts: 72
Thanks Robin, in xCode tha game not compile :S
I just installed Haxe.

dariolessa

  • Posts: 72
The problem is then show ads.

robinschaafsma

  • *
  • Posts: 706
The problem is then show ads.

Huh... what are you doing here?

You cannot use Applovin blocks without initialize Applovin first, this is why it crash.
But if you use Applovin with Heyzap, use the Heyzap "load/show interstitial/video" blocks and not the Applovin blocks.
Then you don't have to initialize Applovin if you use only Heyzap..

In your Heyzap Dashboard enable Applovin under Mediation settings.

dariolessa

  • Posts: 72
Thanks Robin, because hayzap crash, i will use just applovin (without heyzap) but creash too. I am sending screenshots.