Bug Issue: nmefermmmtools


Pages: 1

danielle53

  • Subscriber - Stencyl Indie
  • *
May 07, 2017, 06:02:56 pm
in Engine.hx
com/stencyl/Engine.hx:414: characters 9-50 : Type not found : com.nmefermmmtools.debug.Stats


rob1221

  • Master Stencyler
  • *
May 07, 2017, 06:03:57 pm
I'm guessing these errors you're getting are all caused by the same thing so you don't need to make a new issue for each one.


danielle53

  • Subscriber - Stencyl Indie
  • *
May 08, 2017, 03:44:07 am
if you say so :)  ...

Code: [Select]
com/stencyl/models/Actor.hx:1309: characters 6-17 : box2D.dynamics.B2Body has no field origin
com/stencyl/models/Actor.hx:1310: characters 6-17 : box2D.dynamics.B2Body has no field origin
com/stencyl/models/Actor.hx:1324: characters 7-20 : box2D.common.math.B2Mat22 has no field setAngle (Suggestion: getAngle)
com/stencyl/models/Actor.hx:1328: characters 22-33 : box2D.common.math.B2Transform has no field multiply
com/stencyl/models/Actor.hx:1329: characters 21-35 : box2D.common.math.B2Mat22 has no field multiplyV
com/stencyl/models/Actor.hx:1393: characters 4-13 : box2D.dynamics.B2Body has no field size
com/stencyl/models/Actor.hx:1394: characters 4-13 : box2D.dynamics.B2Body has no field size
plaf/haxe/lib/box2d-fake/1,11/box2D/collision/Features.hx:72: lines 72-74 : Please use set_flip to name your property access method
plaf/haxe/lib/box2d-fake/1,11/box2D/collision/Features.hx:69: lines 69-71 : Please use get_flip to name your property access method
plaf/haxe/lib/box2d-fake/1,11/box2D/collision/Features.hx:62: lines 62-64 : Please use set_incidentVertex to name your property access method
plaf/haxe/lib/box2d-fake/1,11/box2D/collision/Features.hx:59: lines 59-61 : Please use get_incidentVertex to name your property access method
plaf/haxe/lib/box2d-fake/1,11/box2D/collision/Features.hx:52: lines 52-54 : Please use set_incidentEdge to name your property access method
plaf/haxe/lib/box2d-fake/1,11/box2D/collision/Features.hx:49: lines 49-51 : Please use get_incidentEdge to name your property access method
plaf/haxe/lib/box2d-fake/1,11/box2D/collision/Features.hx:42: lines 42-44 : Please use set_referenceEdge to name your property access method
plaf/haxe/lib/box2d-fake/1,11/box2D/collision/Features.hx:39: lines 39-41 : Please use get_referenceEdge to name your property access method
plaf/haxe/lib/box2d-fake/1,11/box2D/collision/B2ContactID.hx:41: lines 41-43 : Please use set_key to name your property access method
plaf/haxe/lib/box2d-fake/1,11/box2D/collision/B2ContactID.hx:38: lines 38-40 : Please use get_key to name your property access method
com/stencyl/io/SpriteReader.hx:342: characters 4-21 : box2D.collision.shapes.B2EdgeShape has no field m_hasVertex0
com/stencyl/io/SpriteReader.hx:343: characters 4-21 : box2D.collision.shapes.B2EdgeShape has no field m_hasVertex3
com/stencyl/io/SpriteReader.hx:358: characters 4-13 : box2D.collision.shapes.B2EdgeShape has no field m_v0 (Suggestions: m_v1, m_v2)
com/stencyl/io/SpriteReader.hx:359: characters 4-13 : box2D.collision.shapes.B2EdgeShape has no field m_v3 (Suggestions: m_v1, m_v2)
plaf/haxe/lib/box2d-fake/1,11/box2D/common/B2Color.hx:57: lines 57-59 : Please use get_color to name your property access method
plaf/haxe/lib/box2d-fake/1,11/box2D/common/B2Color.hx:52: lines 52-54 : Please use set_b to name your property access method
plaf/haxe/lib/box2d-fake/1,11/box2D/common/B2Color.hx:48: lines 48-50 : Please use set_g to name your property access method
plaf/haxe/lib/box2d-fake/1,11/box2D/common/B2Color.hx:44: lines 44-46 : Please use set_r to name your property access method
com/stencyl/Engine.hx:2104: characters 5-22 : Cannot access private field m_bodyCount


rob1221

  • Master Stencyler
  • *
May 08, 2017, 08:47:03 am
I'm guessing your third-party libraries aren't being updated properly.  When you download a new version of Stencyl, are you replacing the existing folder?  What you should be doing is either deleting the existing install folder or installing in a new location.  Also try Run > Clean Project after updating your Stencyl version.
  • Status changed from New to Need Info
« Last Edit: May 08, 2017, 08:47:59 am by rob1221 »


Justin

  • Master Stencyler
  • *
February 04, 2018, 01:54:34 am
Is this still an issue for you?


Justin

  • Master Stencyler
  • *
July 11, 2018, 12:16:35 am
I'm guessing it was a faulty install, but never got more information.
  • Status changed from Need Info to Closed


Pages: 1

Details

  • Reported
    May 07, 2017, 06:02:56 pm
  • Updated
    July 11, 2018, 12:16:35 am

  • View Status
    Public
  • Type
    Bug
  • Status
    Closed
  • Priority
    Normal
  • Version
    (none)
  • Fixed in
    (none)
  • Assigned to
    (none)
  • Category
    Engine

Tags